Do you have a cable or hydraulic clutch? Entity John Rodgers spoke thus: > Chase, Did you have the flywheel re-faced by a machine shop. That is an > absolute must when installing a new clutch. > > So far as other causes, a little oil or grease on the clutch disc will > also contribute to clutch chatter. > > John Rodgers > 88 GL Driver > > Chase Davenport wrote: >> >> Hello folks, >> >> A plain and simple question for y'all: What causes clutch chatter? I >> recently installed a rebuild in my '88 Vanagon and am suffering from >> some bone jarring chatters when engaging the clutch in first or >> reverse. The engine runs beautifully but I fear I didn't install it >> properly. >> >> Thanks for the help. >> >> Chase |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.