Date:         Tue, 29 May 2001 14:48:50 -0700
Reply-To:     wayout <wayout@IX.NETCOM.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         wayout <wayout@IX.NETCOM.COM>
Subject:      Tranny  drain plug / S&S Headers
Content-Type: text/plain; charset="us-ascii"; format=flowed

Oh jeez....
I wanna put new fluid in the tranny... I crawled under there and it seems
that my S&S header pipes are REALLY close to the drain plug.
Too close for a regular 17mm allen wrench or a 17mm socket driven
thingamajig...

Anyone figured out a way to do this?
Arrrgghh!

Thanks
Jason Loewenstein
Marysville / Tulalip, WA
85GL

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.