Question, on my '84, I have the following hoses and fittings coming off the hose barb on the passenger's side of the inlet manifold: 1. Short hose 2. Y-fitting with one leg of the Y having very small diameter and hooked to a plastic tube that goes into the fuel vapor recovery system (?) 3. Another short hose 4. T-fitting with one leg smaller diameter leading to valve that opens when A/C is on and with larger diameter leg leading to auxiliary air regulator. Is this correct configuration? John Lauterbach Macon, GA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.