At 10:01 AM 6/8/2001, Jay L Snyder wrote: >Only the full (green) light appears to work anymore on my water tank level >indicator. They all worked up until sometime last year. Any simple fix >for this? How does this system work? Are there contacts in the >tank--there looks like three studs that stick through the tank wall. > Jay '85 Westy Jay, likeliest thing is a contact problem. Pull the panel and ground the green wire at the connector -- if all three lights go out then the panel is probably ok. The little magic resistor pack in the secret compartment might be bad, but they don't often fail. david
David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.