Hello listees: I´m trying to figure out the timing for my 84´ Carburated Westy and one of the mails reads: " Code EY 5 degrees +/- 1 degree BTDC at 850 +/- 50 rpm vacuum disconnected Code DF 5 degrees +/- 1 degree ATDC at 750 +/- 50 rpm vacuum connected Code DG and SP 5 degrees +/- 1 degree BTDC at 900 +/- 50 rpm vacuum disconnected Code GW for 98 octane fuel 10 degrees +/- 1 degree BTDC at 880 +/- 50 rpm vacuum disconnected Code GW for 95 octane fuel 5 degrees +/- 1 degree BTDC at 880 +/- 50 rpm vacuum disconnected "
But I´m not sure what kind of engine code is right; any of you know about this? Where to check? I´m using 90 octane gas. TIA
Javier Zavala 84´ German Westy - Gertrudis
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.