Or I've also heard that the wires from the ECU where they pass through the van body to get to the engine bay, sometimes a wire will rub through it's insulation there and ground out. My $.02 Mark Ingalls ----- Original Message ----- From: Riley Kettner To: vanagon@GERRY.VANAGON.COM Sent: Tuesday, June 12, 2001 6:01 PM Subject: Latest news on No Spark
Hey Listees. I mentioned before that I had no spark coming off the ignition coil. I purchased and installed a new coil to no improvements. New advice from a local mechanic has suggested a hall sensor. This is a dealer only part I'mtold and is expensive. Now before I go and purchase that, are there any other suggestions for what the no spark syndrome could be? I have the digifant fi computer incase that helps. Thanks to Everyone for their support Riley Kettner icq 3666016 North Vancouver BC
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.