In a message dated 6/10/01 4:30:23 PM, kdlewis@JUNO.COM writes: << Have you check the operation of the full throttle position sensor? >> Ken, Coincidentally, I had just gone over the engine with a tune up and that was one thing I adjusted. The cutting out I described was not a degradation of performance or driveability, instead it was as if the plug had been pulled abruptly. Also, since the cutting out did not occur when I took the throttle to the floor more gradually, I suspect a wire was in a strain somewhere only to short or open when the engine was jerked around by the throttle. Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.