Date:         Sat, 9 Jun 2001 16:30:51 -0700
Reply-To:     Bill N <freeholder@STARBAND.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bill N <freeholder@STARBAND.NET>
Subject:      Re: Vanagon trailer wiring help needed
Comments: To: SyncrogalVW@CS.COM
Content-Type: multipart/alternative;

Vanagons have different light setups than most trailers (separate brake and turn signal lights) so you need an adaptor that you can buy at most auto parts stores for $10 to $15.  It will come with instructions.
  ----- Original Message ----- 
  From: Loretta Abbott-Kennon 
  To: vanagon@GERRY.VANAGON.COM 
  Sent: Saturday, June 09, 2001 12:59 AM
  Subject: Vanagon trailer wiring help needed


  Hi List, 

  I purchased a "hitch haul" wheel-less trailer for my Syncro trip to Alaska.   
  Since the Van's low tail lights would be covered by my gear I decided to 
  mount trailer lights to the thing. 

  I spliced into the wires for the left and right turn signals & brake lights 
  with no problem, they worked to operate the "trailer" lights just fine.   

  The problem came when I spliced into the running light wire (I used the right 
  side) when I hooked up the trailer lights and turned on the lights at the 
  dash, the fuse blew for the right side marker (running) lights. 

  Is there anyone who can offer some advice on what I can do to make the 

  running lights work?  Any suggestions would be appreciated! 

  Thank You, 
  Loretta 
  87 Syncro GL (Alaska bound!) 
  90 GL 

[text/html]