Date:         Wed, 13 Jun 2001 16:12:53 -0700
Reply-To:     mike miller <mwmiller@CWNET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mike miller <mwmiller@CWNET.COM>
Subject:      Re: Fw: Spillage when filling the gas
Comments: To: Tony <tgerr95@YAHOO.COM>
Content-Type: text/plain; charset="iso-8859-1"

Don't know about the filling but the gas mixing is silly and a waste of
money unless you have a modified engine with higher than stock compression.

According to my brother in law who's been in the gas cooking business for 40
years every major and all the minor brands of gas put in the same or nearly
the same cleaners and suspension agents in regular and hi test [the only
grades actually brewed, midgrade is just a 3 to 5 mix regular to hitest].
And putting in higher than called for octane does nothing for you unless you
have an ignition system that can adjust timing on the fly based on knock
sensors.

Just what he said but sounds corrects.  David B you want to weigh in here?

Mike

----- Original Message -----
From: Tony <tgerr95@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, June 13, 2001 1:42 PM
Subject: Re: Fw: Spillage when filling the gas


> Me 3 - only mine doesn't spill down the sides - it
> pours out of the bottom of the van. I calc the amount
> of gas necessary - ie an empty tank = 13.5 gallons
> (holds 16) and stop at that point.
>
> ALSO - my mechanic suggests 50/50 mix of mid grade and
> hi grade -- any feedback volks???
>
> Tony
> 89 Carat - Agnes
>
> --- LeeAnn Medlock <Phx13WS@AOL.COM> wrote:
> > me too.
>
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail - only $35
> a year!  http://personal.mail.yahoo.com/
>