My 1980 2.0l engine is already for final assemble (tin, EGR, exhaust, FI). However in search of the EGR gaskets I have a problem. I asked my rebuilder to order the set for me and VW gave them 6 gaskets (4 15mm and 2 14mm). ETKA states that two 14mm are placed at the tin (where EGR pipe passes through) and one 15mm at the crossover pipe. Then it gives a part number on the text sheet that has a "x" marked for quantity. These are 15mm gaskets. But also another 5.5mm and 19mm gasket are called for in the diagram to complete the system. My question is did VW just substitute 2 of the 15mm gaskets to replace the 19mm and the 5.5mm??? SeanG 80 Westy (my project) 95 EV Camper (wifes daily, current family camper) 88 F-150 (old reliable) 90 Sentra (current daily) seangar@hotmail.com _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.