Howdy, all. Just back from my NM trip, I decided to change the oil in my 85 Westy. 1. Now, the books say to check for bits of metal in the old oil when you drain it. Last time, it was ok (about 3k miles ago). This time, I found a single, paper-thin piece of metal, about 3/16 inch long and 1/16 inch wide. Am I in trouble? 2. I'm trying a Wix filter (p/n 51342). The guy at my FLAPS said it has one of those cool valves to retain oil when the engine is shut off. No mention of this feature on the box it came in, though. Anyone have any experience with these? Thanx in advance for the help. Dave in KC 85 Westy http://members.fortunecity.com/davebaker1 p.s. - I'm using Quaker State 10W-40. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.