You shouldn't have to remove it, as Pat points out. I found it easier to install with the protection plate removed. Also, if you get the two white plastic snap-on covers for the new model Marshall 290 regulator, you can then snap on the larger one with the part that protects the drain vent just as you make the last 1/4 turn. That part of the plastic won't clear 360 degrees because of the tank. Having the protection plate off helps. My RV shop had recommended cutting of that part of the cover away, but my method didn't require it. Of course, you'll probably sheer the bolts when you remove the protection plate, so be ready for that with some new ones. Richard A. Jones Boulder, Colorado '81 Vanagon Mr Bus '87 Syncro Westy El Jefe |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.