I'm looking for an exhaust manifold for an 80-83 Vanagon (aircooled) 2.0L. I am making a custom exhaust system and only need the portion of the exhaust that bolts directly to the "square" exhaust ports on the heads and extends down past the pushrods tubes. No heat exchanger, mufflers, etc. required. Just the exhaust flanges and about 6 inches of down pipe to where it goes into the collector. If anyone has a used exhaust system that may have been replaced with new equipment....I would be interested in the flanges and downpipe I could use to weld a custom straight pipe system to. Contact me offlist please. Jack Lockamy Camarillo, CA. jacklockamy@att.net
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.