I've got a VDO oil preasure gauge with the standard big fat sender. On the sender terminals; one is marked G the other WT. I'm sure that the one marked G goes to the G terminal on my gauge. The question is what goes to this second terminal marked WT? It originally had a white wire to it. Quick tip! If you need to hook up both your idiot light and a regular electronic sender you can get them out of the way of your distributor by putting your T fitting on the end of a flexible grease gun hose. The hose is rated at 3000PSI and already has 1/8" NTP fittings on both ends it also have small 3/32 holes in the fittings that help keep gauge bounce under control.
Stan Wilder ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/tagj. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.