I think they all solved that problem by letting the Chinese make all the threaded fasteners. I broke two new bolts off trying to get 16 FT Pounds of torque when installing a new pleasure plate. I substituted the whole set with grade 8 socket head cap screws that will definitely hang in there. Stan Wilder On Wed, 27 Jun 2001 23:22:23 -0700 Bill N <freeholder@STARBAND.NET> writes: > The metric folks don't have so much room to laugh. I owned a bicycle > shop > for most of the 1970s. We worked with American, English, German, > French, > Italian, and Japanese parts commonly. Guess what? The French, > Italian, and > Japanese metric fasteners were all incompatible. The diameter and # > threads > per centimeter could be the same, and they still didn't fit properly > because > the thread pitch -- the angle on the threads -- was different. I > don't know > if that is still the case, but it was then. > > Bill > > ----- Original Message ----- > From: "Austin" <austins@IX.NETCOM.COM> > > > > >American drill sizes half-inch and under include 1/16-1/2 by > 64ths, then > > >numbers 0 (a bit under 1/4) to 80 (a bit under 0.02), then > letters A > (close > > >to 1/4) to Z (close to 1/2). > > > > > >The metric folks tend to fall on the floor in hysterics when they > think > > >about this... <g> ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/tagj. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.