Date:         Sun, 24 Jun 2001 19:25:15 -0400
Reply-To:     Matt Sim <mattsim@WORLDNET.ATT.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Matt Sim <mattsim@WORLDNET.ATT.NET>
Subject:      Re: WANTED:  Exhaust Manifold
Comments: To: Jack Lockamy <jacklockamy@ATT.NET>
Content-Type: multipart/alternative;

You might try some of the 914 header systems that are out there, and chop them up to suit your needs.  Try TWEEKS.

Matt
New Cumberland, PA
'81 Westy (current)
'74 914 (current)
'95 Nissan Altima (daily)
'72 Fastback
'83 Rabbit
'81 Rabbit
  ----- Original Message ----- 
  From: Jack Lockamy 
  To: vanagon@GERRY.VANAGON.COM 
  Sent: Sunday, June 24, 2001 6:46 PM
  Subject: WANTED: Exhaust Manifold


  I'm looking for an exhaust manifold for an 80-83 Vanagon (aircooled) 2.0L.

  I am making a custom exhaust system and only need the portion of the exhaust that bolts directly to the "square" exhaust ports on the heads and extends down past the pushrods tubes.  No heat exchanger, mufflers, etc. required.  Just the exhaust flanges and about 6 inches of down pipe to where it goes into the collector.

  If anyone has a used exhaust system that may have been replaced with new equipment....I would be interested in the flanges and downpipe I could use to weld a custom straight pipe system to.

  Contact me offlist please.

  Jack Lockamy
  Camarillo, CA.
  jacklockamy@att.net

[text/html]