Date:         Fri, 29 Jun 2001 18:35:42 -0400
Reply-To:     marty <ricin@MEDIAONE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         marty <ricin@MEDIAONE.NET>
Subject:      removing front brake grease caps
Content-Type: text/plain; charset="iso-8859-1"

ok, I have a real question now, I'm doing the front disc brakes and turning
the rotors on my 85 and all the bentley says is "Grease cap, remove with vw
637/2". I've taken the little retaining clip off the little square nut thing
sticking out of the grease cap, what next? I've tried prying and banging but
don't want to proceed if in fact the cap "screws" off. And yes, I'm doing
the brakes so I can slow down after I break the sound barrier :)

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.