VANAGON archives -- June 2001, week 5 (#192)

Date:         Fri, 29 Jun 2001 20:34:27 -0700
Reply-To:     Ed DeBolt <eddebolt@NETZERO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ed DeBolt <eddebolt@NETZERO.COM>
Subject:      Re: Jerky Speedo needle
Comments: To: JordanVw@aol.com
Content-Type: multipart/alternative;

I think that is a speedo cable that is in need of lube. does the cable also make noise in cold weather??

some folks remove the cables and let them hang straight and dribble lube down the cable housing. you might also try disconnecting the top cable at the cluster and lubing it in place.

  -----Original Message-----
  From: JordanVw@AOL.COM <JordanVw@AOL.COM>
  To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
  Date: Friday, June 29, 2001 8:24 PM
  Subject: Jerky Speedo needle

  anyone else had this prob?  the speedo needle is "shaky" until about 40mph.. 

  any ideas? 
  TIA 
  chris 

[text/html]

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.