One way to keep it from splashing so much is to aim it over at the side of the bowl. You do know you can raise and lower as well as twist the spout? Jerry ----- Original Message ----- From: "Graham Mingst" <GRAHAM.MINGST@CHASE.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, July 02, 2001 11:56 AM Subject: Re: Is the galley sink/pump supposed to "dribble"
> Mine is high pressure too. A little too high. Has anyone mounted a screen > or something to break up and soften the water flow so it doesn't splash as > much when used. > > Regards > Graham > > previous > > >The opening in the facuet is small so it might take a minute or two at the > >most to fill the sink. But The water sprays out at quite a clip in my > westy. > >Sounds like you have probelm. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.