Date:         Mon, 2 Jul 2001 22:43:20 -0700
Reply-To:     Tony <tgerr95@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tony <tgerr95@YAHOO.COM>
Subject:      Re: oil plug woes
Comments: To: MVAone@aol.com
In-Reply-To:  <8b.8c28238.28726fcd@aol.com>
Content-Type: text/plain; charset=us-ascii

sounds like a plausible fix - please elaborate on the
part about the insert - is it a threaded insert?

Tony

PS

My mechanic buddy suggests warm engine, ice cube(2) on
the plug to cool it and try again

My shop mechanic says $40-50 to drill out, helicoil
and new threads to factory spec


--- MVAone@aol.com wrote:
> you are at the life sucks part. You should be able
> to get the plug out, the
> metal is really soft. I would have a machine shop
> make you an insert out of
> aluminum and lock tight it in. The helicoil that was
> in my van ended up
> inside the pan.  Tough to get out but I did it with
> a boroscope. Now have an
> insert and a standard plug. Piece o cake


__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/