Patrick, YES, they are a bolt on. Easy as unbolting the old rockers, change the studs to the ones provided, add some shims, bolt on new rockers, Adjust to one turn in after contact, change stock rocker covers with a set of clip on (same as stock) deep aluminum valve covers. Then drive with more power... I even made a web to show how to install them. If you add the bigger valve heads, change the pistons to 95 mm big bore to create a stronger pull on the intake or you will lose low end power. If you only clean up the casting marks on the intake ports and do not increase size, then just blend in the larger valves under the seat. You might retain low end power. Robert |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.