Steve, Temp 1 and temp 2 start at same value. Temp 2 slowly drops to .24v, fully warmed. O2 signal starts at .33v, slowly climbs to .65v as motor warms. When temp 2 reaches about .35v, O2 signal swings from -.14 to .63v. I've never seen it hover around .50v. Are my readings normal? Who knows! It runs strong however. Jim Barnes 87 syncro 86.5 qsw
Steve Sandlin wrote: > > Does anybody have a "nominal" set of digitool readings for both a cold > engine and warmed up at driving speeds? I'm specifically interested in Temp > 2 and O2. I realize O2 should search, but how positive and negative? > Thanks for the help. > Steve Sandlin > Steve's Lock Shoppe > '84 Wolfsburg Westy > '79 Bus > '00 New Beetle > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.