Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2001, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 12 Jul 2001 16:22:43 -0000
Reply-To:     Mike Finkbiner <mike_l_f@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Finkbiner <mike_l_f@HOTMAIL.COM>
Subject:      Re: nominal digitool readings (digifant)
Content-Type: text/plain; format=flowed

Steve -

It's interesting to see the differences. On my '87 digifant system, the temp 2 drops to as low as .08 when very warm, but generally seems to run about .10 to .14. The Temp1 and Temp2 readings with a cold engine depend on outside temperature, but should be almost identical.

The O2 starts at about .35 when cold. After it warms up, it hardly ever goes to negative, but gets as high as .6 or .7. It bounces constantly. I think you can sort of tell how hard the engine is working. When I accelerate the values seem to stay high for awhile. When I am coasting, the values drop to very low figures.

I would be curious to know what other people have for a warm idle AFM reading. Mine is about 1.5, after fiddling with the spring in the AFM. When cold, it's about 1.8 at idle.

Also, what are you getting for Voltage? Mine runs at about 13.1 most of the time, dropping below 13 when I run the headlights, or the AC compressor is on. (It cycles above and below 13 as the compressor clutch engages and disengages).

Thanks

Mike Finkbiner '87 Westy Moscow, Idaho

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Date: Wed, 11 Jul 2001 21:39:55 -0600 From: James A Barnes <j10152@AMIGO.NET> Subject: Re: nominal digitool readings with digijet

Steve,

Temp 1 and temp 2 start at same value. Temp 2 slowly drops to .24v, fully warmed. O2 signal starts at .33v, slowly climbs to .65v as motor warms. When temp 2 reaches about .35v, O2 signal swings from -.14 to .63v. I've never seen it hover around .50v. Are my readings normal? Who knows! It runs strong however.

Jim Barnes 87 syncro 86.5 qsw

Steve Sandlin wrote: > >Does anybody have a "nominal" set of digitool readings for both a cold >engine and warmed up at driving speeds? I'm specifically interested in >Temp 2 and O2. I realize O2 should search, but how positive and negative? >Thanks for the help. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.