I used a big screwdriver wedged against one of the studs and the exhaust against the flywheel teeth. Nothing bent. Karl Wolz ----- Original Message ----- From: "Miguel Calvin" <mcalvin@MAC.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, July 21, 2001 7:26 PM Subject: Rear main seal replacement/flywheel removal
> Oh wise ones, > > I need to get the flywheel off to replace the rear main seal. > > How do I stop it from turning while I apply the 100+ ft*lbs needed to turn > the bolts? > > Any tricks known to work without bending anything? > -- > Miguel > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.