Date: Fri, 20 Jul 2001 14:11:32 -0400
Reply-To: "R. Hotchkiss" <richard.hotchkiss@VERIZON.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "R. Hotchkiss" <richard.hotchkiss@VERIZON.NET>
Subject: Re: Was: Middle Seat Shoulder Belts
Content-Type: text/plain; charset=iso-8859-1; x-mac-type="54455854";
x-mac-creator="4D4F5353"
The saga continues...part did not come in, we'll try again on Thursday.
Hotch
"R. Hotchkiss" wrote:
> VW will do it for free, just ask. I'm happy to see the V689104 tech included,
> guess I'll be going back.
>
> Hotch
>
> Éric Giroux wrote:
>
> > Folks,
> >
> > I suspect the tech bulletins to be:
> >
> > V689103 REAR 3-POINT SEAT BELTS, RETROFIT INSTAL
> > or
> > V689104 AUTO 3PNT LFT CNTR SEAT-BELT RETROFIT IN
> >
> > This is from http://www.vw.ddsltd.com/, with a search on Vanagon with
> > 'belt' keyword.
> >
> > Since this is tech bulletin, NOT recall, I expect this to be at cost...
> >
> > Éric
> >
> > At 03:00 PM 19/07/2001, R. Hotchkiss wrote:
> > >Dealer just called to say that it will have to stay the night because they
> > >don't have all the parts yet. Brings it up to 5 days. Now I know why I do
> > >my own work this thing.
> > >
> > >Hotch
> > >
> > >"R. Hotchkiss" wrote:
> > >
> > > > Hey all,
> > > >
> > > > Today, after much polite dealer service crap, the Shoulder belts are
> > > > being installed into the back of my 86 GL for free. Although, it is not
> > > > what I thought I was getting. VW is installing shoulder belts for the
> > > > two outside positions of the back seat not the middle seat as I had
> > > > hoped. It has taken 3 trips to the dealer to have this done; first trip
> > > > they claimed there was no place to install them, 2nd trip they said that
> > > > they needed a VW rep to come by and show them how to install (2 days at
> > > > dealer) then said they didn't have the hardware (bolts), 3rd trip,
> > > > today, should do it.
> > > >
> > > > Details of how they work etc. The replacement belt return bolts on to
> > > > the body behind the panel that covers the washer fluid (RR) to 3 of the
> > > > holes that are pre drilled at the factory just to the rear and below the
> > > > washer tank (the tank is triangular) and to a spot under the very most
> > > > rear panel where the is a white plastic plug in the bolt hole. The 3rd
> > > > point is where your current belt is already. The cutting of panels is
> > > > necessary.
> > > >
> > > > I will try to get part numbers and tech bulletin numbers from them when
> > > > I pick it up.
> > > >
> > > > Hotch
> > > > 86 Vanagon GL
> > > > 89 Jetta GL
> > > > Philly
> > > >
> > > > --
> > > > Richard Hotchkiss
> > > > http://www.hotstrings-inc.com
> > >
> > >--
> > >Richard Hotchkiss
> > >http://www.hotstrings-inc.com
>
> --
> Richard Hotchkiss
> http://www.hotstrings-inc.com
--
Richard Hotchkiss
http://www.hotstrings-inc.com
|