Date:         Mon, 16 Jul 2001 22:18:57 -0400
Reply-To:     Kenneth D Lewis <kdlewis@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kenneth D Lewis <kdlewis@JUNO.COM>
Subject:      Re: wiring for gauges
Comments: To: hector.zapata@XRXGSN.COM
Content-Type: text/plain; charset=us-ascii

Hector;
        Be aware; the grease gun hose and/or tee connector may have
standard 1/8 npt threads. These are VERY close to the metric sender. It
will probably screw in, once. Damage to the block's threads may occur. I
had to use quite a selection of adaptors to hook mine up.

Good Luck and Drive Safely
Ken Lewis
86 Crewcab,60 356
http://Neksiwel.20m.com/

On Mon, 16 Jul 2001 21:18:33 -0400 Hector Zapata
<hector.zapata@XRXGSN.COM> writes:
> Today I wired my VDO gauges, .....using a hose from a grease gun....
brass t-adapter, female on all three sides, and already have the hose
> and
> VDO sender attached, and prepared a grounding wire for the hose.
> I'll be
> connecting the hose to the case, and on the other side, both
> senders.
> Hector
> 1990 Carat
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.