Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2001, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 15 Jul 2001 08:45:47 -0700
Reply-To:     mike miller <mwmiller@CWNET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mike miller <mwmiller@CWNET.COM>
Subject:      Re: Thanks, and, uhhh, van misses
Comments: To: "Thomas D. Hanlon" <hanran@earthlink.net>
Content-Type: text/plain; charset="iso-8859-1"

I looked at the cap and rotor [and plugs] in So Cal. All looked fine.

Darn thing.

Thanks,

mike

----- Original Message ----- From: Thomas D. Hanlon <hanran@earthlink.net> To: mike miller <mwmiller@CWNET.COM>; Vanagon <vanagon@GERRY.VANAGON.COM> Sent: Sunday, July 15, 2001 6:29 AM Subject: Re: Thanks, and, uhhh, van misses

> Mike, > One consideration...... > Unless the rotor and the distributor cap are Bosch (and, definitely, not Wells, > from your FLAPS) you may experience missing, as I did, and either a burned rotor > and/or a burned cap. Check the conditions of the rotor and the cap. > > Tom Hanlon > Palm Springs, CA > 84 Westfalia > > mike miller wrote: > > > Dear wise listees [you can tell I want something] > > > > Thank you for the responses to the transmission problem. Turned out to be a > > blown pilot bearing, apparently it hadn't been changed when the last clutch > > job or two were done. Darn > > > > Missing. > > > > The van started missing under load on a trip to Southern California [from > > northern Cal.]. After the clutch job drove it once and it was fine. Then > > as soon as I started back to Nor Cal it started missing again. this time > > felt like it was running on 3 cylinders. Then it would clear and run fine, > > then back to missing. > > > > Was smogged just prior to trip and passed OK, not great though. > > > > Had new Bosch single platinum's in it, new rotor and cap. Changed the > > platinum's to copper Bosch in Southern Cal. Checked rotor and cap, just > > generic FLAPS stuff but looked OK. Ran the van and sprayed brake clearer at > > every air bearing surface I could find, no change in engine note. > > > > Got 20 mpg going south and from 15 to 18 coming north [against a very stiff > > wind]. > > > > Any ideas what to look at from you oh wise list gurus? > > > > TIA > > > > Mike > > > > Oh, forgot that I put two new wheels on it that I got from BenT. Do you > > suppose he did me in? > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.