Date:         Thu, 19 Jul 2001 10:06:00 -0800
Reply-To:     "Standley, Craig" <standlc@DATA-IO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Standley, Craig" <standlc@DATA-IO.COM>
Subject:      Re: Help with 1980 dizzy please
Content-Type: text/plain

Ugh.  I had to look high and low to find a stock replacement for my '81.  I
went through probably 5 of them before finding the correct one.  Personally,
I wouldn't take his word for it.  Also, the outside is not always the same,
I found after putting in several different ones that they are quite
different.  The vacuum  canister is on different sides on some of them for
one thing, that fact drove me nuts for a while because I just couldn't find
the right one that would fit correctly.



-Craig


> -----Original Message-----
> From: Sean Garrett [SMTP:seangar@HOTMAIL.COM]
> Sent: Thursday, July 19, 2001 9:05 AM
> To:   vanagon@GERRY.VANAGON.COM
> Subject:      Help with 1980 dizzy please
>
> I just recently recieved a remanufactured dizzy. The serial number on the
> side states it is for a BUG. I own a 1980 Westy and just had the motor
> rebuilt but have not installed it yet. My rebuilder put in a 009 inplace
> of
> my shot vacuum advance stock dizzy. I want to put in a stock dizzy. The
> vendor I bought the stock remanufactured dizzy from states that the
> outside
> of the dizzy is that same for several models (where the serial number is
> stamped) but the inards of my dizzy are different and correct for my van.
> How can I verify this????
>
> SeanG
> 80 Westy (my project)
> 95 EV Camper (wifes daily, current family camper)
> 88 F-150 (old reliable)
> 90 Sentra (current daily)
> seangar@hotmail.com
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp