Date:         Sat, 21 Jul 2001 20:26:19 EDT
Reply-To:     Cotsford@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steve Cotsford <Cotsford@AOL.COM>
Subject:      Transmission filler
Comments: To: thornton@math.utah.edu
Content-Type: multipart/alternative;

The drain plug requires a 17mm allen wrench that you can get from Sears or
NAPA.

The filler plug needs the same tool and it is located on the rt side of the
transmission, a little forward of the drive shaft and a little higher.
You will need to do some acrobatics with the wrench handle pointing upwards
to get it loose but its not really that hard , unless someone overtightened
it.
The thread is tapered so the looser it gets, the easier it comes out.

Steve Cotsford
'84 Westy

[text/html]

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.