i am putting my camping setup back together after putting down soundproofing material. i've run all new hoses and whatnot, and am hooking up the wires. i've forgotten which way the water pump wires go together. the twin plastic-housing male spade connector setup has the black and the yellow wires (yellow being the switched wire through the spigot). my water pump has brown and blue wires with female spades on the end. anyone know if blue or brown goes to yellow? does it matter? i don't want to spin the pump the wrong way, or otherwise ruin it. any help is appreciated. thanks. bill '87 syncro westfalia http://www.scruznet.com/~kasper/pics/westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.