Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2001, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 26 Jul 2001 14:45:16 -0500
Reply-To:     John Rodgers <jhrodgers@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <jhrodgers@CHARTER.NET>
Subject:      Re: Tranny oil-level (AA Trans take on the subject)
Comments: To: Zoran Mladen <zmladen@AVOLENT.COM>
Content-Type: text/plain; charset=us-ascii

In production, that sounds like a reasonable approach to a small problem. The cost of remaking a mold for production for that simple an item would be enormous. I think they did the right thing.

John Rodgers 88 GL Driver

Zoran Mladen wrote: > > I was looking at the Bentley the other night and found something interesting > regarding trans oil level. Bentley claims that in an effort to ease > shifting, the recommended level for oil (on I believe it was 85 on), was > actually 15mm below the oil fill plug. Bentley specifically states that the > oil plug was not moved down 15mm because VW did not want to change the > transmission mold. Anyone else see this or have an opinion? > > Z > > -----Original Message----- > From: Daryl Christensen [mailto:aatransaxle@JUNO.COM] > Sent: Wednesday, July 25, 2001 11:51 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Tranny oil-level (AA Trans take on the subject) > > As I see it...the VW personages tried to improve on the shifting whilst > using Dino oil and not synthetic...With Redline or any good quality > modern synthetic, the point is moot due to the thinner viscosity of > modern oils...When VW was trying to "modify" the shifting it may have > been to improve the old stuff that was truly 90 wt and not the 75 or so > weight oils we now use.. > I know many shops that just put any old thing in there and fill till it > dribbles out the fill hole...never have I had a customer with a problem > that I am aware of from filling it that way. I firmly believe that just > changing it once in a while is the key to longevity...as the trans wears, > a synthetic may help the shifting more than a fresh rebuit trans. I > haven't put anything other that Redline in for years, so can't vouch for > how most shift with plain old 90 wt in 'em. > Just change it every 30K and use synthetic if available (esp in colder > climates) > Daryl of AA Transaxle > Duvall, WA.(Seattle area) > (425) 788-4070 > 1-877-377-0773 toll free > http://www.aatransaxle.com (web site)


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.