My problem is that I need a couple of the wiring diagrams from a Bentley manual for the OBD-2 Golf/Jettas (1996 or newer IIRC). I need the wiring diagrams that show how the check engine light is wired from the ECU. I am doing a TiiCo Conversion and want to have a dash mounted check engine light. My Vgon is wired for a OXY sensor light even though the LED isn't installed (There is the little black thing in its place, but the wiring in the cluster is there).The TiiCo ECU is a newer version of the Motronic FI from the gen 3 VWs. I want to install the LED in its socket (formerly wired for the OXS) and use it to run the check engine light. Sean B. '90 V'gon, "Happy Bus", pseudo Wolfy Torrance, CA http://vgonman.vwtrek.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.