Date:         Tue, 31 Jul 2001 14:21:36 -0700
Reply-To:     vgonman@EARTHLINK.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Sean B." <vgonman@EARTHLINK.NET>
Subject:      golf/jetta 3 check engine light question (vanagon content)
Comments: To: Vanagon-EngConv@yahoogroups.com
Content-type: text/plain; charset=us-ascii

My problem is that I need a couple of the wiring diagrams from a Bentley
manual for the OBD-2 Golf/Jettas (1996 or newer IIRC). I need the wiring
diagrams that show how the check engine light is wired from the ECU.

I am doing a TiiCo Conversion and want to have a dash mounted check engine
light. My Vgon is wired for a OXY sensor light even though the LED isn't
installed (There is the little black thing in its place, but the wiring in
the cluster is there).The TiiCo ECU is a newer version of the Motronic FI
from the gen 3 VWs. I want to install the LED in its socket (formerly wired
for the OXS) and use it to run the check engine light.
Sean B.
'90 V'gon, "Happy Bus", pseudo Wolfy
Torrance, CA
http://vgonman.vwtrek.com