Date:         Fri, 3 Aug 2001 10:12:23 EDT
Reply-To:     KENWILFY@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         KENWILFY@AOL.COM
Subject:      Re: Radio security code input ??
Comments: To: doublecabguy@powersurfr.com
Content-Type: multipart/alternative;

Every radio I have fooled with has not had the security code in it.  If yours
does then unless you can find some paperwork with the number on it you are
goofed (one radio actually had the code written in marker on it- thoughtful
dealer:).  Here is what I do on a non-coded radio to get it to work again:

Turn on the radio
Push and hold AM/FM Band Selector and Scan simultaneously until 1000 appears
(may be several seconds).  Now push the buttons for the presets until you see
the display read 1111.  Now push and hold the AM/FM Band Selector and Scan
buttons again until your radio starts to work.  If your radio does have a
code then enter it instead of 1111.  Hope this helps.

Thanks,
Ken Wilford
John 3:16
www.vanagain.com
Phone: (856)-765-1583
Fax: (856)-327-2242


[text/html]