Hi All, In a continuing effort to get scientific or should I say be able to bleed the breaks with minimal light (i.e. running late and doing it at night, or when you drop the drop light, kids have run the batteries out of the flashlight playing tag, etc...). Using a digi-wife or digi-kids method (keep in mind that you cannot ask a friend to help with this job because there is no grease, oil, or grime involved and a friend most likely wouldn't stoop so low as to help work on the van without getting dirty) how many cycle from each front brake and how many of each rear break does it take to flush the fluid through? When I bleed the brakes I've always continues bleeding the fluid until it runs clear and the a few more. I know one can get a one person bleeding device from Wal-Mart for about $30 but are there any thoughts on the manual method? Thanks in advance, Jere 90 GL 88 GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.