Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (August 2001, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 18 Aug 2001 09:29:29 -0700
Reply-To:     Todd Last <Rubatoguy@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Todd Last <Rubatoguy@MINDSPRING.COM>
Subject:      Re: Rotary Motor
Comments: To: Andrew Grebneff <andrew.grebneff@STONEBOW.OTAGO.AC.NZ>
Content-Type: text/plain; charset=us-ascii

I had an old RX-7 ('85) and I got better gas mileage than I get with the Vanagon. I'd average 19-25mpg - depending on how much foot I used. However, I do agree with you that a rotary would not be a great choice for a Van motor because the rotary has so little torque at low RPM - this was even noticeable in the RX-7 which is not a heavy vehicle by any means.

On the other hand, it would be cool to see one. I know that Kennedy Engineering makes an rotary to VW trans adapter.

Perhaps if you used a late model RX-7 twin turbo rotary motor, you might have an interesting combo - but you would probably need to beef up the transmission.

Todd

Andrew Grebneff wrote:

> >I am looking for pictures or information > >on installing a rotary, specifically in > >a syncro Van. The main concern at this > >point, before it commences is one of ground > >clearance and/or cover height. > > A Wankel rotary in a VW van would be an evil pig. > > This is because the rotary develops almost all of its torque at > near-redline RPM. For a heavy van what you need is an engine with a good > spread of torque, including at low RPM. A rotary would work... but you'd > have to rev it to get off the line, which is annoying; also shortens clutch > life and economy. Speaking of economy, you'd better have a supertanker that > you can tow around to keep your Vanavannah (most Mazda rotaries are called > Savannah in Japan; some are Cosmo, giving Vanasmo) fed. And a bank account > to suit. > > Did you know that VW owns the patents to the Wankel engine?? > > Andrew Grebneff > 165 Evans St, Dunedin, New Zealand > <andrew.grebneff@stonebow.otago.ac.nz> > ph 64 (3) 473-8863 > fax 64 (3) 479-7527 > 84 VW Caravelle GL (to be fitted with SVX engine & Porsche G50 trans) RWD > 87 Corolla 1.8 DX CE80 diesel sedan FWD > 89 Corolla 1.8 DX CE96 diesel van/wagon FWD > 89 Corona 2.0 D Select CT170 diesel sedan FWD > 92 Toyota Estima Lucida (=Previa) 2.2 turbodiesel RWD


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.