Hi All, There was some discussion about fuel pressure regulator (FPR) testing and manifold vacuum (MV) a couple of weeks ago on the list. My impression from that discussion was that people typically evaluated the performance of their FPR by measuring fuel pressure on the low pressure side of the system (i.e. at the test tee). Two measurements are made: one with the vacuum hose connected to the FPR and one with the vacuum hose disconnected from the FPR and plugged. Bentley provides a spec. for these two measurements: 28 psig and 36 psig, respectively (IIRC). The problem with this spec. is that we don't know (okay, I don't know--maybe you do) what idle MV is for this spec. As MV decreases, the fuel pressure at the tee will increase. In other words, if you have an MV leak and perform this test, you'll measure something higher than 28 psig for the hose connected test, even if your FPR is mechanically sound. Frank Grunthaner suggested that the 10 to 12" of vacuum many of us consider "normal" for our wasserboxers seems too low and that at least 15" is more typical for modern gasoline engines. Sooo... I performed an experiment to find out what the test tee fuel pressure would be if my manifold vacuum was 15". I did this by disconnecting the FPR vacuum hose and plugging it. Then I connected my MityVac brake bleeder/vacuum diagnosis tool. This tool is a simple hand-actuated vacuum pump that can pull up to 30" of vacuum. It can also function as a simple vacuum gauge. (The vacuum gauge on this new tool has a stated accuracy of 2-3% but I cannot guarantee its calibration. ) I measured 28 psig at the fuel line test tee with 15" vacuum pulling on the FPR. If I assume my FPR is mechanically fit (I get something like 36.8 with the vacuum hose disconnected at sea level) then that would lead me to conclude that a wasserboxer in perfect mechanical condition would pull around 15" MV at idle (and thus yield 28 psig fuel pressure at the test tee). Agree or disagree? This is definitely not my field of expertise. I could have made some false assumptions or illogical conclusions. Your comments are welcome. Scott Terry '85 1.9L Westy "Pearl" Santa Barbara, CA Still parking next to other Westys despite the danger... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.