Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2001, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 19 Aug 2001 16:42:46 -0700
Reply-To:     Coby Smolens <cobys5@HOME.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Coby Smolens <cobys5@HOME.COM>
Subject:      Re: Dometic refrigerator cooling mystery, '89 Westy
Comments: To: Dana Morphew <kadm@PUGETSOUND.NET>
In-Reply-To:  <3B8049AC.A73CBF49@pugetsound.net>
Content-Type: text/plain; charset="iso-8859-1"

Good suggestion, but... Both Dave and I cleaned the flue, and I inspected it with a boroscope (internally lighted fiber-optic device that lets you see inside skinny little areas). It's spic and span. Since the flue IS the metal being heated and the propane heat source for the boiler tube it's adjacent to, it is important it be clean, as you suggest. However, the mystery here is that the thing (the ammonia-water boiler tube) that's supposed to be heated by the various (12V, 110AC, propane) heat sources IS being heated, to about the same temperature in each case - yet while operating on propane the cooler never gets past about 25 degrees below ambient, compared with more than a 60 degree drop on 110AC. My question is either: What could account for the discrepancy beyond the ammonia-water boiler; or, what am I missing in my understanding of how this system works?

Thanks -

Coby Smolens Valley Wagonworks VW Bus and Vanagon Specialists "Intimately acquainted with VW Vans since 1959"

1535 SF Drake Blvd, San Anselmo, CA 94960 415-457-5628

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of Dana Morphew Sent: Sunday, August 19, 2001 4:20 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Dometic refrigerator cooling mystery, '89 Westy

I don't have a Westy fridge, but I do have a propane fueled demand-fired hot water heater. You must have the metal that is in contact with the flames as soot-free as you can do. The soot will insulate the metal from the flames and badly degrade the exchange of heat.

-Dana-

> > Dave told us the unit wouldn't cool beyond 10 deg F. below ambient while > operating on propane, but made ice on house current. He cleaned the flue, > checked flame everything seemed normal.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.