Date:         Tue, 21 Aug 2001 18:50:03 -0700
Reply-To:     George Wietor <wietorg@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         George Wietor <wietorg@YAHOO.COM>
Subject:      Re: 2.1 l. thermo body o-ring size?
Comments: To: Coby Smolens <cobys5@HOME.COM>
In-Reply-To:  <NEBBIHJLELPNOOAPKNLJCEBDDFAA.cobys5@home.com>
Content-Type: text/plain; charset=us-ascii

thanks all: I found the EKTA refence as well, and
bought a packet of 20 x 26 x 3 mm o-rings at Pep Boys
for $ 1.59.  Way too small.
Then I matched the (stretched) old ring to the
reference book  and bought some bigger ones- just too
big.
I imagine I will need a 26 x 32 x 3 mm o-ring? Any
validation of this conjecture? TIA again-Geo.



--- Coby Smolens <cobys5@HOME.COM> wrote:
> I have it at 26mm X 3mm according to ETKA; VW Part
> #: N 902 781 01
>
> -----Original Message-----
> From: Vanagon Mailing List
> [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
> Of George Wietor
> Sent: Monday, August 20, 2001 5:37 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: 2.1 l. thermo body o-ring size?
>
>
> Hello: I am replacing the o-ring between the
> thermostat body and the engine on my '87 VANAGON.
> The one I removed is now stretched out of
> shape/size.
> Ineed to call around for one locally, but I don't
> know
> the size...
> Save me from having to completely disassemble/break
> the  thermostat housing.
> Van O'White thanks you in advance. George
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute
> with Yahoo! Messenger
> http://phonecard.yahoo.com/


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/