|
Thanks to all who responded to my query. I have removed the alternator, and, lo and behold, the two studs that hold the bottom bracket to the engine block have broken off! Does anyone know if these are threaded into the block or are they somehow welded in there? The one on the left has about and inch protruding, and I may be able to get that out with the vice grips if it's threaded. If not... ??? The one on the right appears to be broken off about 1/8 inch in from the edge of the block. That one will have to be drilled. Too bad the Vanagon doesn't allow you to remove the rear panel below the hatch and above the bumper so I could get straight in with a drill. (Seems to me one of my earlier VWs had this feature). Dave in KC (off to work on a stud with the vice grips) 85 Westy http://members.fortunecity.com/davebaker1 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.