After replacing everything that would be included in an extensive tune-up, and fixing the AFM, I finally solved this problem by replacing every vacuum line, seal and gasket I could reasonable do in an afternoon.
Bradley Flubacher State College, PA '82 VW diesel westy '84 GL wasserboxer -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of Stephen Fry Sent: Friday, August 24, 2001 10:15 AM To: vanagon@GERRY.VANAGON.COM Subject: hesitation
Van is hesitating from a full stop. Apply WOT and nothing after a little bit it will start to go but hesitantly. Have applied air meter fix, could it be that the rails are too worn to send a signal to give gas to motor? Could it be another sensor? O2 just recently replaced. Give me some ideas of what to check and where to check them :o) Thanks for the help and will keep updated.. Stephen |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.