Date:         Thu, 23 Aug 2001 14:28:31 -0500
Reply-To:     wilden1@JUNO.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: Starter Question
Comments: To: BenTbtstr8@AOL.COM
Content-Type: text/plain

You can remove and clean the striker bolt in the solenoid.
I found mine was laden with a fine film of oil and was harboring a fair
amount of carbonized clutch material.
After lightly sanding it, I applied a thin film of silicome spray and
that was four years ago. I haven't touched it since.

Stan Wilder
83 Air Cooled Westfalia
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.