Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2001, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 26 Aug 2001 22:42:47 -0500
Reply-To:     Joel Walker <jwalker17@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joel Walker <jwalker17@EARTHLINK.NET>
Organization: not likely
Subject:      Re: Separating heads from cylinders
Content-Type: text/plain; charset="iso-8859-1"

an old trick i've heard from the british car folks might work ...

remove the spark plug and turn the crankshaft pulley until one of the pistons (on the cylinder head you want to remove) is at its lower point. then start feeding small rope or cord into the spark plug hole. stuff as much as you can in there. then turn the crank pulley one more complete turn and the piston will push against the rope and the rope pushes against the cylinder head and off she comes.

joel


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.