Date:         Thu, 30 Aug 2001 13:05:36 -0500
Reply-To:     Dave Baker <DBAKER5@KC.RR.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dave Baker <DBAKER5@KC.RR.COM>
Subject:      Re: Alternator Bracket Studs - The Final Chapter
Comments: To: Karl Wolz <wolzphoto@worldnet.att.net>
Content-Type: text/plain; charset="iso-8859-1"

Nope.  Even if I take off the water pipe that runs in fron of it, I wouldn't
have enough space to work.  Tried the WD40 and dental tool trick, no luck.
I have thought about custom-building an additional bracket.  I'll see how
solid if feels with the single bolt at the bottom before I take any further
steps.

Dave in KC
85 Westy
http://members.fortunecity.com/davebaker1

----- Original Message -----
From: Karl Wolz <wolzphoto@worldnet.att.net>
To: Dave Baker <DBAKER5@KC.RR.COM>; <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, August 30, 2001 12:39 PM
Subject: Re: Alternator Bracket Studs - The Final Chapter


> Can't you get at it with a right angle drill?
>
> Karl Wolz
>
> ----- Original Message -----
> From: "Dave Baker" <DBAKER5@KC.RR.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Thursday, August 30, 2001 9:26 AM
> Subject: Alternator Bracket Studs - The Final Chapter
>
>
> > Well, gang, I am about to go out and refit the lower alternator bracket
on
> > my 85 Westy.   I never was able to remove the stud on the right side> >
> >
> > ....and for a picture of the sheared studs, see
> >
> > http://members.fortunecity.com/davebaker1/westy/id27.htm
>
>