Date:         Wed, 29 Aug 2001 09:38:13 -0700
Reply-To:     Bill Kasper <dragonlist@IPMTS.UCSC.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bill Kasper <dragonlist@IPMTS.UCSC.EDU>
Subject:      Re: 87 Westy stove and fridge removal
Comments: To: Megan Davis <megandavis77@HOTMAIL.COM>
In-Reply-To:  <F67SkcJse1fTvOSQeSO0000131b@hotmail.com>
Content-type: text/plain; charset="US-ASCII"

on 8/29/2001 9:24 AM, Megan Davis at megandavis77@HOTMAIL.COM wrote:

> we just bought an 87 westy, and would like to remove the sink, stove, and
> refridgerator unit to make room for some shelves (don't think we'll be using
> the stove or sink much).  we have seen a couple that have had this done, and
> it doesn't seem to be too hard, but we were wondering if anyone has any tips
> or suggestions before we begin.  does anybody know if there is anything we
> need to watch out for electrically speaking or otherwise?
>
> thanks for any help!
>
>
>
> ----------------------------------------------------------------------------
>
> Get your FREE download of MSN Explorer at http://explorer.msn.com
> <http://go.msn.com/bql/hmtag_itl_EN.asp>


if you can plan on not driving it while you're doing the work (recommended),
just disconnect the negative lead from the battery and you'll solve the
electrical issues.  make sure you (a) know or (b) mark the electrical
connections you'll have to disconnect to get the thing out.  follow
bentley's instructions on the order of removal.  you might find the
drainpipe from the sink to the floor connector is impossible to get off; the
hose has a soft inside and the connector on the floor is barbed.  i cut mine
off and got some dishwasher hose of the same length to replace it.  works
fine.

hope this helps...

bill
'87 syncro westfalia
http://www.scruznet.com/~kasper/pics/westy/