>Andrew, > >It looks to me from the MSDS instructions for the conversion that the only >thing you will need specifically from them is the rear mount. It appears that >the couplers and other hardware are sourced from Porsche. > >I will be happy to post the MSDS G50 instructions sheets w/ part numbers on >my webpage if I can obtain Marty's permission to do so. Will let the you and >the list know if I receive this permission. Marty, are you reading this? > >BenT Ben You also need an MSDS CNC-milled adaptor to bolt the 911 shifter into the T3 cockpit floor, plus linkage adaptors. These are the expensive bits. The VW shifter won't work the Porsche trans, according to Marty and various Germans who have installed 911 trans in their T3s. In theory my G50 is coming with complete shifter linkage. If it was ever really sent! I'm not happy with Marty, and his German counterparts are useless! Looks like I'll have to get it all made here and hope it all works... Andrew |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.