In a message dated 9/1/01 7:26:40 AM, CTONLINE@WEBTV.NET writes: << I would first adjust the striker plate, so the door sucks in a bit tighter, when you close the door. If this remidy fails, then start moving the hinges. >> Oh, yes the Speaker of Truth from the Voice of Experience. One other thing I found on the Vanagon door I was adjusting was that the striker side had sagged to the point that it needed a couple of C shims under the lower hinge to bring it back to level. Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.