Date:         Sat, 1 Sep 2001 17:35:57 -0700
Reply-To:     Lloyd McClelland <lsm6@NORTHCOAST.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Lloyd McClelland <lsm6@NORTHCOAST.COM>
Subject:      Re: Mounting screw-in cup holders in Van ?
Comments: To: CTONLINE@WEBTV.NET
Content-Type: text/plain; charset="iso-8859-1"

Hey thanks I'll run out and look there! I actually was going to take apart
any plastic panel I drilled into, I'm  trying to keep the DPO mistakes to a
minimum( my local auto repair place yelled at me a lot for my last fog light
melted wiring mess up)....... Lloyd in Eureka, Calif
-----Original Message-----
From: Terry Kay <CTONLINE@WEBTV.NET>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Saturday, September 01, 2001 4:32 PM
Subject: Re: Mounting screw-in cup holders in Van ?


Lloyd,
I can tell you this---
The cupholder's take 3 rivits.
I know there is 6 holes, but in removing them from this Wolfsburg I'm
stripping, they used 3 rivits, in each cupholder.

And for the front one's they are mounted on the inside of the seat
bases.
Like in the isle.

I don't know if I'd be drilling into the dash.

Sounds like trouble.

Later,

            ______________
           |[  ] [  ] [ ]\
           |    |    |    |
     ~~~ ~||-(())----(())-|

Terry--
74 Campmobile- (Clementine)
85 GL- (Delilah)
86 BMW 325 ES- (Eva)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     "In life, it is much better to want
something you cannot have---

Than to have something you can't get rid of"

(T.K.1979)