Charles, The mounting holes are the same except you don't have the third hole on the bottom of the power mirror mounts. You can just drill that there and use a sheetmetal screw instead. The doors which came equipped with them has a captive nut there. There is a hole under the mirror for running your wiring thru. The rest is just a mate of running wiring. It would be best if you got the wiring harness with the mirrors when you get them. One alternative if you like the look of power mirrors but don;t need the wiring hassle is to install them w/o wiring. They look great and do not flop around like the old manual mirrors. You can still manually adjust them by moving the mirror around within the housing. BenT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.