Date:         Fri, 21 Sep 2001 06:43:19 -0400
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Sandwich oil cooler adapter question
Comments: To: Stan Wilder <wilden1@JUNO.COM>
In-Reply-To:  <20010920.190856.-102495.0.wilden1@juno.com>
Content-type: text/plain; charset=iso-8859-1

Those are not check valves. they are bypass valves which only get used if
the oil filter or cooler become blocked.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Stan Wilder
Sent: Thursday, September 20, 2001 8:09 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Sandwich oil cooler adapter question


I just finally got around to installing the axillary oil cooler on my  83
Westfalia Air Cooled.
I installed the additional cooler by using an Empi sandwich type adapter
that goes between the oil filter and the original filter mount.
I've got a question:
I noticed that the sandwich adapter and the original oil filter mount
both have check valves in them. Does this dual check valve scenario
present any problems?.
Seems to me that they would hardly ever even get into sync except at high
pressure.

Stan Wilder
83 Air cooled Westfalia
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.